Filtration Equipment for Coolant Systems
Encyclon Cyclonic Filtration Systems filter, circulate and store coolants for metalworking and other water-base or synthetic liquid operations. They operate on the simplest, most efficient means of separating foreign particles from liquids–centrifugal force generated in a cyclonic chamber. They employ no filter media or diatomaceous earth. Because of its double cleansing action, the Encyclon cyclonic chamber removes 98% of all particles to 3 or 5 microns without impairing the original chemical properties of the coolant.
Drag-Out Filtration System

These systems are available in tank capacities from 350 to 3000 gallons with flow rates from 60 to 560 gpm. Optional coolant refrigeration systems are available.

For questions about how Encyclon
drag-out filters work click here.
Dual Tank Filtration System

These systems are available in tank capacities from 100 to 600 gallons with flow rates from 20 to 200 gpm. Coolant refrigeration systems are optional. Single tank and floor stand models are available.


Oil Skimmers

Wheel type skimmers are available that remove oil from coolant at the rate of 1.5 gpm. To download a on oil skimmers.
Click Here
Advantages of Encyclon Fitration Units  
High Efficiency
Cyclonic Filtration Systems offer 3 or 5 micron filtration with 98% efficiency. The Systems will remove ferrous, non-ferrous and non-metallic particles (i.e. swarf). This means better product finish, less wheel dressing, longer life for grinding wheels and diamonds, less abrasive particles in ways and spindle bearings. Time spent dressing and changing wheels now becomes valuable production time.

Extends Coolant Life
You save on coolant costs because you use less coolant and frequent disposal costs are eliminated. You greatly reduce the cleaning and downtime involved in coolant changes. Turn machine downtime into cost-saving profits.

Arrests Bacteria Growth
There are no filter media to clog or replace. Encyclon aerates coolant to check anaerobic bacterial growth.

Compact Design
Building block design conserves precious floor space–also lets you customize the Encyclon Cyclonic Filtration System to your requirements. The Encyclon System can be used with individual machines or as a centralized system.

Easy To Install
Systems are completely assembled and tested before shipping. You connect only the existing coolant feed and return lines from your machine and the electrical service.

Low Maintenance
Most models have just one moving part–the circulating pump. Operating and maintenance costs are kept at a minimum.

Simple To Service
The system cleans itself as it runs. Never change filter media because there are none.

Fast Pay-back
The coolant costs, disposal costs, wheel costs and downtime you save will quickly pay for your Encyclon system.
Download Filtration System Cost Justification Spreadsheet (51 KB) FILTER.XLS
Download Coolant Mix Calculation Spreadsheet (15 KB) COOLNTMX.XLS
Download Drawing of Type 65 Cyclone Unit (68 KB) S13Atype65.pdf
Checkout How Cyclonic Fitration Works - (4 KB) EncyclonWorks.html
 Pressure Water Recycling Encyclon builds filtration systems for recycling waste water from marina pressure washers used in boat washing for state EPA or Clean Marina requirements - click here

Mike Petsch & Associates, Inc.