FlexLine

 Flex-Line Tabletop Conveyors

 

    Specifications:

  • Straight running chain: 3-1/4", 4-1/2", 6". 7-1/2", 10", 12"
  • Side flexing chain: 3-1/4", 4-1/2", 7-1/2", 10", 12"
  • Tabletop chain sprockets on drive and idler ends
  • PVC return rollers
  • Replaceable UHMW-PE wearstrip on top chain carry-way
  • 12 GA., 5-1/2" deep conveyor frames
  • 1" dia. Shafts
  • 2-Hole flange mount, re-lubricatable, precision ball bearings
  • Adjustable double rail, UHMW-PE faced guide rail
  • 3/16" x 1-1/2" structural angle legs with stainless steel adjustable feet
  • All connecting plates and fasteners are included
  • Specify machinery gray, white or machinery green enamel finish
  • Custom paint colors available on request

    Stainless Steel Conveyor Specifications: (Same as above except)

  • Frames and bearing plates 12 GA., #304 stainless steel with #4 polish
  • Motor mounts, chain guard, end cap/finger guard, fasteners, 3/16" x 1-1/2" structural angle legs and feet, guide rail brackets, shafts, and connecting plates are all stainless steel.

    Drive Units:

  • Standard motors are 230/460, 3 phase, 60 Hz, TEFC, with reducer, roller chain, sprockets and chain guard mounted to unit. Specify as desired.
  • Electrical controls are not included but may be quoted separately.

    Options:

  • Manual push button, Start-Stop switch with Magnetic contactor and overload protection in NEMA 1 enclosure.
  • Manual push button, Start-Stop switch with overload protection in NEMA 1 enclosure.